• Conveyor for Edam cheesemoulds

• Transportable belt conveyer with V-profile
• Power: 0,37 kW
• Number of revelations: 96 rpm, with speed variator and tachometer
• Height 1: 220 mm
• Height 2: 960 mm
• Width of belt: 420 mm
• Distance between rolls: 2.900 mm

• Weighing conveyor
• Transport belt width 490 mm.
• Transport belt length 800 mm.
• 4 load transducerer

• Shrink tank
• On wheels
• Dimensions inside: 500 x 500 x 550 mm
• Total height: 1.250 mm
• Immersion is air actuated

• Transportable cheese paraffin bath 

• Air pressure drive pump
• Suction side: 3/4"din
• Pressure side: 3/4"din

• Air pressure drive pump
• Max. air pressure: 5 Bar

• Various equipment for pilot plant
  -  Small tanks
  -  Heat exchanger
  -  Water treatment set

• 63FS50-FMW01A00B2T
  + MYCOM 152
  Size DN 50

• 33HP26-BCBAA11A21A
• DN25

• Pipe: 2,5"
• Diameter: 1.480 mm
• Total height: 2.600 mm
• For 5.700 l/h 5 minutes holding time

• 2 x OST cheese vat in very good condition
• Incl. whey drainage system with motor and gearbox 
• Heating jacket on lower half of cilindrical section
• Internal lighting
• Manhole with sliding door on top position
• CIP connection
• Minimum level
• Incl. MCC panel and pneumatic valve panel
• Wheight: ca. 3.000 kg  

• OST 5 cheese vat in very good condition year 2006
• Incl. whey drainage system with motor and gearbox
• Incl. controlling S7 and control panel
• Heating jacket on lower half of cilindrical section
• Internal lighting
• Manhole with sliding door on top position
• CIP connection
• Minimum level
• Wheight: 3.700 kg

• Machine No. 633110.02

• 1 up to 30 cilinders in 1 or 2 rows
• A cylinder is operated independently by a manual ventile
• incl. air regulator
• aluminium press plates
• press plate declines for draining off whey

• Capacity from 500 - 25.000 l/h  
• Smaller types can be fitted out with electrical heating

   

• 3 x butterfly valve l/dr 1”
• 3 x butterfly valve dr/dr 1”
• 2 x butterfly valve dr/dr 1,5”
• 3 x butterfly valve dr/dr NW 40
• 6 x manual actuator 1”
• 5 x flanged butterfly valve l/l
• 2 x butterfly valve 2,5” l/l
• 1 x butterfly valve 2,5” AISI 316 l/l
• 1 x flanged butterfly valve 4” l/l
• 1 x flanged butterfly valve 4” with air actuator l/l
• 2 x butterfly valve DN 50

• 3 pieces
• DN 65  PN40

Change-over valve 2,5" 

Number of valves: 33

Change-over valve 2" 

Number of valves: 10

• Double walled insulated stainless steel tank
• Total lenght: 3270 mm
• Total height: 1700 mm
• Width 1650 mm.
• Outflow: 2"  

• Insulated tank
• Stainless steel 304
• Inside diameter: 2040 mm
• Total hight: 2600 mm
• Outflow: NW 80
• Chassis width: 2440 mm
• Chassis length: 6050 mm
• Manhole
• CIP connection
• Bordes
• De-aeration with valve

• Machine for the filling of EDAM- cheese moulds
• For 0,5 kg Edammer moulds
• Can easily be adapted for 2 kg Edammer  

• Outflow: 2"
• Propeller agitator
• Temp. gauge
• Complete with cleaning unit
• Inside diameter: 2.000 mm
• Inside height: 950 mm

• Input: 1,5"
• Outflow: 2"
• Cleaning connection 1,5"
• 2 Propeller agitators
• Temperature gauge
• Outside diameter: 1.450 mm 

• Ice water cooling tank
• Outflow: 2"
• Without lids

Total height: 1800 mm

• Build: 1990

• Starterprocessing with 4 starterunits

Variable

220/380 Volt  1,1/1,9 Amp.

• Air power double diaphragm pump
• Suction side: 2"
• Pressure side: 2"
• Air connection 3/4"

• Condensator

• Ultra High Temperature- installation up to 150 degrees
• Completely sanitary
• Max. flow: 300 l/h
• Holding tubes: 5, 10, 20, 30, 40 sec.
• Equipped with:
  -  control panel
  -  2 centrifugal pumps
  -  2 plate heat exchangers
  -  2 coolers
  -  several flow-, temperature- and pressuremeters
  -  etc.

• Suction side: 2,5"SMS
• Pressure side: 2,5" SMS
• Power: 1,5 / 2,2 kW
• Rotation 51 / 100 r.p.m. 

• Mixer 
• Power: 3 kW
• Axis lenght:700 mm
• Propeller diameter: 100 mm

 Dynamic frute in -line mixer

• Lfting stands mixer nr. 9710069
• Power 0,37 Kw.
• Diameter mixer 350 mm.
• Lifting 800 mm.

• Power: 1,1 kW

• Power: 0,25 kW

• Power: 0,37 kW

• Power: 0,3 kW

• Axis lenght: 630 mm
• Propeller diameter: 250 mm

• Transportable tankmixer with tipping device
• Power: 1,3 kW
• Axis lenght: 800 mm
• Propeller diameter: 90 mm

• Agitor for cheesevat
• Axis lenght: 760 mm
• Propeller diameter: 640 mm
• Power: 1,45 A / 250 Watt

• Power: 0,18 kW
• Axis lenght: 610 mm
• Propeller diameter: 90 mm
• Tank cover diameter: 540 mm

• Power: 0,75 kW
• Axis lenght: 725 mm
• Propeller diameter: 130 mm

• Cleaning funnel
• Total length: ca. 6.200 mm
• Maximum dimensions of moulds: 400 x 200 mm

• Transportable cleaner, Pneumatic operated
• With connectors for water and foam

• Milk churn washer for 2 churns
• APV centrifugal pump
• Anema centrifugal pump

• Incl. CIP-pump Loware 36-87 m3/hr 23,1-11,8 mwk
  Power 4 kW
• 3 layers for cleaning LxBxH 750x570x300 (each)
• Moter for curculation 0,55 kW
• Serial nr. 703115
• Year of construction 1999

• Power 0,55 Kw. 380 V.
• 1410 r.p.m.

• Transportable pump
• Suction side: 2"din
• Pressure side: 2"din
• Power: 2,2 kW
• 750/1500 rpm

• Suction side; 2"din
• Pressure side: 2"din
• Power: 3 kW

• Suction side: 2"din
• Pressure side: 2"din
• Power: 3 kW

• Stainless Steel cheese moulds
• Dimensions: Ø 230 mm
• Height: 100 mm

• Stainless Steel cheese moulds
• Dimensions: Ø 110 mm
• Height: 96 mm

• 15 x Stailless Steel Perforated
• Inside Lenght 500 mm.
• Inside width 300 mm.
• Inside Height 140 mm

• Inside diameter vat: Ø 310 mm
• Only new available

• Single walled Pressure tank
• Max. 4 bar
• Outside diameter: 1080 mm
• Total height incl. frame: 1870 mm
• Outflow: 1,5"

• Power: 18,5 kW
• 1.450 rpm
• Inclusive adapt flange

Power 15 kW

400/690 Volt

Axis diameter: 40 mm.

2.920 r.p.m.

• Square electric driving
• Flange diameter: 220 mm

• Axis diameter: 40 mm
• 11 kW - 380V - 2930 rpm

• Axis diameter: 40 mm
• Power: 15 kW - 380V - 1460 rpm

• Axis diameter: 40 mm
• Power: 15 kW - 380V - 1460 rpm

• Electric motor with variator
• Power: 0,55 kW

• Power: 0,87 kW

• 110 kW 380V / 203 A
• 1400 rpm
• Axis diameter: 80 mm

• Electric driving, output side is turned 180 degrees
• Axis: sprocket with 15 teeth, thickness 5 mm, diameter 67 mm
• Power: 0,75 kW

• Power: 0,29 kW
• 2" outflow valve
• Build: 1995

• 380/660 V.
• 105 Amp.

• Ice water storage bank
• Storage capacity: 20.000 kcal

• Labelling machine
• In combination with filling machine number 830

• Rotating filling machine
• Suitable for the following packaging dimensions: 150 x 115 mm
• Suitable for Feta cheese filling
• Also suitable for salade filling
• Inclusive weight and laballing machine

• 14 x Schulenburger
• After electro-hydraulic lifting of the sieve- and whey-vat the milk is filled in the curd maker and renneted.
  The whey vat with the sieve goes automatically down 10 hours after siwtiching on resp. by manually operation.
  The sieve with the whey vat presses onto the curd, the outcoming whey gets through the sieve and is pumped with a whey pump into the whey vat.
  
  After the curd is taken out and the whey was let out of the whey vat, the sieve and the whey vat are descendend in the vat. Then cold water is pumped into the cleaning system for some minutes in order to achieve a pre-cleaning. Afterwards a 5-%-lye, heated to 70ºC,m is pumped through the cleaning system with circulation procedure. Then you rinse again with cold water. (germicide can be added) MADE AS NEW
• Input: 2.000 liter skimmed milk
  Output: 350 - 450 kg Quark
• Up to 50 % dry solid in end product
  

• Cheese storing frame
• Width: 800 mm
• 20 layers

• Brining bath
• Outflow: 2,5"

• Briningbath for 4 cages, transport cart and lifting hook included
• Material: 316
• Cage: 6 layers

• 8 layers
• Distance between layers: 150 mm

• 11 layers
• Distance between layers: 150 mm

• 5 layers
• Distance between layers: 250mm

• 10 layers
• Distance between layers: 170 mm

• 8 layers
• Distance between layers: 150 mm

• Dynamic frute in -line mixer Without tube
• Power: 0,75 kW
• 178 r.p.m.

• Dynamic frute in -line mixer
• Mix pipe 700 mm
• Inlet side: 2"din
• Outlet side: 1,5"din
• Power: 0,75 kW
• 178 r.p.m.

• Dynamic fruit in -line mixer
• Mix pipe 700 mm
• Inlet side: 2"din
• Outlet side: 1,5"din
• Power: 0,75 kW
• 178 r.p.m.